DJ Equipment+

By admin 　http://www.djflipg.com/gmi-pro/

Gmi Pro

 

---

 
Do you want to Phono Plug the CB microphone wiring?

I Shure's old record of 100 series CB on the microphone to use I do not understand is a problem. Where the four wires, two that they Not required for use and fitness, so I'm never land 2 wires, one hot and one is assumed. I'm up for righteousness has phono plugs Fixed it, but I do not actually touch it with a Microphone elements may not work. It set me on the ground I think. I'm the metal case, the test-out. Rising Not sure what, but, herer's a PDF. It is the circuit diagram Shows the bottom of assistance. http://www.shure.com/stellent/groups/public/ @ GMS_GMI_WEB_UG/documents/web_resource/us_pro_101c_ug.pdf Some assessments significantly.

Your audio device or a computer If he had not recorded. pdf files showed that the microphone The old phone was typically used for microphone elements 3 Radio equipment of carbon granules. Reference: http://www.aerialpursuits.com/comms/mikes.htm NOW, Using computers and electret condenser mikes Pro Audio Or other more advanced uses several capacitors - millivolt range Sound within a very low level of the microphone to export Design, generally. They are in most applications The pre-amp - you need a computer sound card is built-in preamp However, the carbon microphone, the electret it, like a little power, and Require an external voltage input voltage output voltage (hence, If you build a 5-volt is the percentage of carbon equivalent The output signal through a microphone for your up to 5 volts) is. This is the CB microphone, and uses an external Power Supply needed Signalling its significance can not be higher than your average Microphone. Check out this guy's article. He called in the old CB has a microphone to use, but you like your Microphone types: http://www.instructables.com/id/Telephone-Handset-Microphone/ His solution is a single battery (1.5 volts) to add, with the voltage down, and add some resistance As a result, the signal feed line includes a microphone jack (jack rather than later Approximately one-volt signal from the microphone is about, it is Than the level of the microphone closer to the Line Level. Your Mike If he thinks I'm adding the solution, it works. Include Why work when you get it ... I'm your body to the microphone A few millivolts may be thinking that this supplies enough Good enough mic microphone - input to generate a few millivolts of the output was Jack, however, perhaps more than you need to get the sound from the microphone What. PC sound card or a USB cord from the 5 Volt Tap Maybe you can come and test the microphone power is applied The microphone used in the voltage and resistance level gets down the line. If you have access to the phantom power, you do the same thing You can try. PDF file of the current specification of the CB microphone Mike mentioned that the operation needs to be used as a guide.

GMI Tagbilaran


 

---

 



 

---

 
SunGard Announces Q2 2010 Results Wayne, Daddy ---- SunGard, a company of the world Leading software and technology services, today reported results for 2 quarter ended June 30, 2010. Quarter, a $ 1.30 billion in revenue, down 5% per year Was over $ 126,000,000 and income from operations was.

---